Description
Integrates a Si photodiode for precision photometry with low-noise amp (Photosensitive area: 10 × 10 mm)
C10439-03 photodiode module is a high-precision photodetector that integrates a Si photodiode and a current-to-voltage amplifier. The output from the photodiode module is an analog voltage and can be easily checked with a voltmeter, etc. Since their sensitivity is switchable between two ranges (High/Low), highly accurate output can be obtained by selecting the proper sensitivity range that matches the light level to be detected.
Features
- Photosensitive area: 10 × 10 mm
- Voltage output for easy handling
- Two-range (High/Low) switching function
- Compact: half size of a business card
- Can be mounted on optical bench rod (M4)
Click here to view a full product spec sheet PDF.
| Product Specifications |
| Device types |
PD module |
| Detector Series |
Si PD
|
| Spectral response range |
190 to 1100 nm |
| Peak wavelength (typ.) |
960 nm |
| Effective photosensitive area |
10 x 10 mm |
| Package |
Enclosed module |
| Cooling |
Non-cooled |
| Output Type |
Analog voltage output
|
| Dark signal (typ.) |
-5 mV to +5 mV |
| High range |
|
| Conversion impedance |
1 x 10^9 |
| Cutoff freq. high |
10 Hz |
| Cutoff freq. low |
DC |
| Low range |
|
Conversion impedance
|
1 x 10^7 V/A |
| Cutoff freq. high |
1 kHz |
| Cutoff freq. low |
DC |
| Recommended voltage (typ.) |
+/- 5 V |
| Current consumption (typ.) |
+/- 2 mA |
| Measurement condition |
Ta=25 ℃ |
Additional information:
Technical note for Si PD
This product will ship 4 days after email order confirmation is sent.
